Yellowtec m!ka YT3701, Брифинг-бук

Страница: 25 / 27

48 49
m!ka Remarks
Page 32
- The total weight of the m!ka Twin Monitor Mount and the weight of your two
monitors has to meet the maximum load capacity of your m!ka Monitor Arm.
Page 33
- To secure proper upright positioning of the m!ka Bushing drill a hole with a
minimum diameter of 22 mm.
- The thread of the bushing is metric. Should you ever need to replace the nut make
sure you use the correct M20x1,5 thread.
Page 34
- Use an Allen Key to fix the m!ka Pole Adapter properly.
- Use a yellow spacer with the m!ka Pole Adapter.
Page 35
- Never use the m!ka Table Clamp on curved surfaces - it may slip off!
Page 37
- You do not need to drill a central hole when you use a m!ka Table Top Mount.
- Make sure you have suitable screws for the type of panel you install the base ring to.
Page 38
- When installing the m!ka Wall Bracket it is your obligation to verify that your wall and
your fasteners are suitable to hold the load.
- Always use a yellow spacer.
Page 40
- Make sure the m!ka Pad-Dock is properly oriented to support the tablet.
- In order to hold the tablet properly, its size needs to be min 160mm and max 300mm.
- Tablets will fit at both landscape and upright orientation.
Page 41
- An audible “click“ signals that the m!ka Pad-Dock is securely locked into position.
Page 42
- The Perspex® Panel for your m!ka CopyStand holds and aligns by integrated magnets.
- Make sure the magnets face each other.
- Follow cleaning instructions. Never use detergents or alcohol.
- For daily care use micro fiber cloth supplied with m!ka CopyStand.
Page 43
- You can deactivate the QuickFix function for security reasons. Turn in the screw next
to the release lever in order to disengage its function.