background image

Getting Started 

Thank you and congratulations 

 

for choosing 

INTELLIMIX

. Straightforward and quick to use,

 INTELLIMIX

 will readily meet your very own requirements. Please 

read this brief introduction carefully, which will give you the most important information you need to start using your new 
system. These instructions provide you with the basic information you need for the assembly and operation of the parts 
supplied. 
 

Your opinion is important to us!

 

 
The innovative dedication of the YELLOWTEC organization lies behind this product. When you tell us about your new ideas 
and requirements, we listen to you closely!  

 

Use our web site http://www.yellowtec.com to stay constantly up to date with product developments, and to communicate with 
us. You will also find valuable tips  and tricks here as well as new software to download for your 

INTELLIMIX

, and a host of 

other interesting information from the world of YELLOWTEC.

 

 

 

Reduced to the max!

  

 

INTELLIMIX

 is a three channel, fully digital audio mixer with integrated routing matrix and highly flexible control logic. User 

specific set-ups can be called up using a YELLOWTEC SmartCard

®

. The primary application for 

INTELLIMIX

 will be for 

computer-assisted workstations to serve as the “interface” between existing audio sources and the soundcard of the AWS 
(Audio Workstation). 

INTELLIMIX

 was developed for today’s requirements in audio production areas of radio and television, as 

well as for use in Post Production work areas. 
 
The equipment explains itself through it’s intuitive user guide. However, you should read the following information carefully!  
 

First steps 
 

INTELLIMIX

 is shipped in two separate boxes. Unpack the boxes with care. The foam -cladding insert is for the protection of the 

user surface and should be separated from th e box after unpacking.  This can easily be pulled out as there is only a weak 
adhesive attaching the foam to the box. Please think about the environment and dispose of the foam and the cardboard 
separately. Check to see that everything is delivered. If you have any questions please contact your dealer directly.  
 
Included with 

INTELLIMIX

 

are the following: 

 

1.  Base Unit (19“-rack) 
2.  Control Unit (Table-top Control Unit) 
3.  Connecting cable to Control Unit (approx. 5m) 
4.  Connecting cable to Computer (RS232)  
5.  Mains lead (not included for all countries) 
6.  Brief introduction “Getting Started“ 
7.  YELLOWTEC CD-ROM with set-up software und electronic user manual 
8.  YELLOWTEC SmartCard

® 

(1 piece) 

 

 

Electrical connection

  

 
First connect the 

INTELLIMIX

 

control unit to the base unit us ing only the long cable that is designated Control Unit. Plug it in on 

the underside of the control unit and carefully feed it through the cable pull restraint, so that 

INTELLIMIX

 can stand securely on 

the table. Position the control unit so that the user surface and the displays are at a convenient angle. 
 
Now connect the base unit to the mains power. 

INTELLIMIX

 

is equipped with a switched-mode power supply and will work with 

any voltage from 90V to 240V AC mains without the need to select.  
 

Always observe local safety regulations! Please see the notes on safety at the end of this document!  

 
Now switch on the power for 

INTELLIMIX

 using the mains switch (on the rear of the base unit). The displays show the power-up 

process and the system performs a lamp test.

 INTELLIMIX

 is now ready for use with the last working parameter set-up. 

 

INTELLIMIX

 

can be switched to standby mode so that you can turn all functions off. To enter standby, press SHIFT and TALK 

together and hold down for approx. 4 seconds. The unit will switch off. Use the same button combination to switch 

INTELLIMIX

 

on again (You can change these settings later by use of the set-up software). 
 

Please note that power will only be removed completely from INTELLIMIX

 by operation of the mains switch on the 

back of the Base Unit.  Before opening the case of the unit, the mains plug must always be removed from the supply!

  

 
On power-up, 

INTELLIMIX

 recalls the default set-up. For safety reasons, the monitor is set to a predetermined level at switch 

on. 

Отзывы: