background image

YELLOW JACKET

®

Anemometer/Thermometer

FPM, CFM and temperature readings with one hand-held instrument

Operation 
and Maintenance

UPC No.
686800

68915

The YELLOW JACKET Anememoter 
/ Thermometer 68915 is a versatile 
instrument that measures air velocity 
(FPM - feet per minute; or MPS - 
meters per second), air flow volume 
(CFM - cubic feet per minute; or CMS 
- cubic meters per second) and 
temperature. Temperature is read at 
the same time as velocity or flow 
measurements in your choice of °F or 
°C. The unit eliminates analog charts 
that are hard to read and calculate.

Features include:

Microprocessor controller

Minimum and maximum   
recordings

Averaging of FPM, MPS or CMS 
multipoint readings

“Hold” button to freeze LCD 
reading

Switchable imperial to metric

Automatic power shut-off after 20 
minutes unless set for continuous 
operation in non-sleep mode

RS-232 output

Specific applications in the HVAC 
industry include environmental paint 
booths, air balancing, and many others 
where measurement of air velocity, 
flow and temperature are essential.

Check for damage immediately.

Carton contents include:
1 pc. hand-held instrument
1 pc. vane type probe head with cable
1 pc. 9-volt alkaline battery
1 pc. maintenance & operation 
   instructions
1 pc. carrying case

Содержание 68915









Отзывы: