Yeastar Technology TA3210, Руководство пользователя

Страница: 22 / 66

TA3210 User Manual
22/66
SIP Settings
It is wise to leave the default setting as provided on this page. However, for a few
fields, you need to change them to suit your situation.
1) General
Figure 4-5 SIP General Settings
Table 4-4 Description of SIP General Settings
Item Description
UDP Port Port used for SIP registrations. The default is 5060.
Enable Random Port Enable or Disable Random SIP port.
Random Port Update
Interval Set the Random Port Update Interval.
TCP Port Port used for SIP registrations. The default is 5060.
TLS Port Port used for SIP registrations. The default is 5061.
TLS Verify Server
When using TA FXO Gateway as a TLS client, whether
or not to verify server’s certificate. It is “No” by default.
TLS Ignore Common
Name Set this parameter as “No”, then common name must be
the same with IP or domain name.
TLS Client Method
When using TA FXO Gateway as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
RTP Port Start Beginning of the RTP port range.
RTP Port End End of the RTP port range.
DTMF Mode
Set the default mode for sending DTMF. Default setting:
rfc2833
Max Maximum duration (in seconds) of a SIP registration.