Yeastar Technology S20 Скачать руководство пользователя

Страница: 96 / 129

S-Series IP PBX Administrator Guide

Advanced

Table 9-10 SIP Advanced Settings

Option

Description

Allow RTP Re-invite

By default, the system will route media steams from SIP endpoints

through itself. Enabling this option causes the system to attempt to

negotiate the endpoints to route packets to each other directly,

bypassing the system. It is not always possible for the system to

negotiate endpoint-to-endpoint media routing.

Get Caller ID From

This decides the system will pull Caller ID header from which header

field.

User Agent

This allows you to change the User-Agent field.

Get DID From

This decides the system will pull DID from which header field. If

Remote-Party-ID is selected but the line does not support this, DID will

be pulled from Invite header.

Send Remote Party ID

Whether to send the Remote-Party-ID in SIP header or not. The

Default is no.

Send P Asserted Identify

Whether to send the P-Asserted-Identify in SIP header or not.

The Default is no.

100rel

Check the option to enable 100rel.

Send Diversion ID

Whether to send the Diversion ID in SIP header or not. The Default is

no.

Allow Guest

If enabled, it will allow the unauthorized INVITE coming into the PBX

and the calls can be made. The default is no.

IAX

Table 9-11 IAX Configuration Parameters

Option

Description

UDP Port

UDP port used for IAX2 registrations. The default is 4569.

Bandwidth

Control which codecs to be used based on bandwidth consumption.

Maximum Registration/

Subscription Time

Maximum duration (in seconds) of an IAX registration. The default is

1200 seconds.

Minimum Registration/

Subscription Time

Minimum duration (in seconds) of an IAX registration. The default is 60

seconds.

Codec

Choose the codec.

Содержание S20


































































































































Результаты поиска

Содержание S20

Отзывы:

Похожие инструкции для S20

Бренды по названию

Популярные бренды

Yeastar Technology S20, Руководство администратора

Результаты поиска

Содержание S20

Отзывы:

Похожие инструкции для S20

Бренды по названию

Популярные бренды