S-Series IP PBX Administrator Guide
81
Disable Forward When Busy
Dial this feature code to disable when busy call forwarding.
The default feature code is *072.
Enable Forward No Answer
Dial this feature code to forward calls to voicemail or a designated
number when no answer. For example: dial *73 to forward calls to
voicemail when no answer, and dial *73500 to forward all calls to
number 500 when no answer (this number does cont include
prefix, if you are required to dial with prefix, you need to configure
it in Call Forwarding in Edit Extension window).
The default feature code is *73.
Disable Forward No Answer
Dial this feature code to disable no answer call forwarding.
The default feature code is *073.
Call Monitor
Listen
Dial this feature code and the monitored extension number to
initiate Listen monitoring. In this mode, the monitor can only listen
to the call but can't talk.
The default feature code is *90.
Note: to monitor an extension, you need to configure the Monitor
Settings for this extension first.
Whisper
Dial this feature code and the monitored extension number to
initiate Whisper monitoring. In this mode, the monitor can listen to
and talk with the monitored extension without being heard by the
other party.
The default feature code is *91.
Note: to monitor an extension, you need to configure the Monitor
Settings for this extension first.
Barge-in
Dial this feature code and the monitored extension number to
initiate Barge-in monitoring. In this mode, the monitor can listen to
and talk with both parties.
The default feature code is *92.
Note: to monitor an extension, you need to configure the Monitor
Settings for this extension first.
DND
Enable Do Not Disturb
Dial this feature code to put the extension in Do Not Disturb state.
The default feature code is *74.
Disable Do Not Disturb
Dial this feature code to take the extension out of Do Not Disturb
state.
The default feature doe is *074.
Voicemail
The configurations of voicemail can be globally set up and managed on the Voicemail page. Go to
Settings
>
PBX
>
General
>
Voicemail
, you can configure the Message Options, Greeting Options
and Playback Options.