TG100 User Guide
16/75
Procedure
1.
Navigate to
Gateway
>
Mobile List
>
Mobile List
, and click
.
2. On the
General
section, select
Yes
or
No
from the drop-down list of
Call
Progress Tone
.
Configure the Call Duration of Mobile Trunk
You can limit call duration for each call of the mobile trunk or make a monthly talk plan
for the mobile trunk.
Note:
The system starts to count the talk time when the SIM card is installed on the TG
gateway. The system doesn’t count the talk time that has been used on the SIM card
earlier.
Set a Single Call Duration of Mobile Trunk
By default, the system doesn’t limit single call duration of the mobile trunk. The default
value of
Single Call Max Duration
is 0. You can define the maximum number of
minutes called within a single call.
Procedure
1. Navigate to
Gateway
>
Mobile List
>
Mobile List
, and click
.
2. On the
General
section, change the value of
Single Call Max Duration
.
Set a Monthly Talk Plan of Mobile Trunk
By default, the system doesn’t limit monthly talk time of the mobile trunk. You can set
monthly talk plan for the mobile trunk to count and limit the talk time of outgoing calls
on your TG gateway.
Procedure
1. Navigate to
Gateway
>
Mobile List
>
Mobile List
, and click
.
2. Click the
Call Duration Settings
tab.
3. Set the value of
Round up duration
.
4. Set the value of
Max. Call Duration
.
For example, the Round up duration is 60 seconds and a call lasts 3 minutes and
15 seconds; the system will count the talk time as 4 minutes.
5.
(Optional)
Enable clear stat and set the clear period and time. The system will
clear the call duration data on the TG gateway regularly.
