MyPBX U300 Administrator Guide
47
PIN Settings
Go to
PBX
→
Advanced Settings
→ PIN Settings
to create a PIN list. The PIN lists
can be selected to access restricted features.The PIN can also be added to the CDR
record’s “Account Code” field. PIN list can be applied to Outbound Route.
Figure 7-7 PIN Settings
Blacklist
Blacklist is used to block an incoming/outgoing call.If the number of incoming or
outgoing call is listedin the number blacklist, the caller will hear the following prompt:
“The number you have dialed is not in service. Please check the number and try
again”.The system will then disconnect the call.
Go to
PBX→Advanced Settings→Blacklist
to add numbers to the blacklist.
You can choose to block the number for inbound, outbound or both.
If the type is “inbound”, then this number can’t be called.
If the type is “outbound”, then the extensions in MyPBX U300 can’t call this
number.
Figure 7-8 Number Blacklist