Yeastar Technology MyPBX Standard Скачать руководство пользователя

Страница: 82 / 123

MyPBX Standard Administrator Guide

DNIS

DNIS (Dialed Number Identification Service) is a telephone service that identifies for

the receiver of a call the number that the caller dialed.

Users could configure DNIS to allow the IP phones to display which trunk is passing

the call.

Suppose a company has two trunks, one for sales service, one for support

service.

To make a difference between two kinds of calls, we can configure two DNIS

for the two trunks.

PBX→Advanced Settings→DNIS Settings

, click

to create a DNIS.

Figure 15-11 Add DNIS



Trunk Name :

Choose a Trunk for the DINS.



Enable DNIS:

Tick to enable DNIS feature.



DNIS Name:

Give a name for this DNIS, when a call reaches the selected trunk,

the name will be displayed on the ringing phone.



DNIS Number:

DID number will be needed for SIP trunk, BRI trunk, because

these trunks may have multiple numbers,and multiple DNIS can be set for one SIP

trunk.

Notes:

1. PSTN trunk do not need to set DID number.

2. If you do not set the DID number, all calls through selected VoIP/BRI trunk will

show the DNIS name as Caller Name.

Содержание MyPBX Standard




























































































































Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды

Yeastar Technology MyPBX Standard, Руководство администратора

Результаты поиска

Содержание MyPBX Standard

Отзывы:

Похожие инструкции для MyPBX Standard

Бренды по названию

Популярные бренды