Digium IP Phone Configuration Guides
www.yeastar.com
Page 3
feature code is set in MyPBX’s web GUI. Let’s say we set the feature code as
10000, we can enter “10000” here.
Figure 3
Setting "Line Status"
Setting “Line status” in other lines: before register, you should enable “line
status”.
6.
We now need to set the phone to register with MyPBX. Click “Line1” tab, and in
the "General" section, configure as follows:
Figure 4
General Section
1)
User ID/Extension: the extension’s number, such as 105
2)
Authorization Name: same to extension’s number
3)
Line Label on Phone: the label displayed on the phone, you can
customize it or same to extension’s number
4)
Caller ID Name: the extension’s caller ID, such as 105 in this guide
5)
Digitmap: leave it as default settings
6)
Register: set “Register” as “YES”
7)
Password: enter the password of the extension you want to register
7.
Setting “Host" as follows:
