Star2Star Yealink SIP-T26P Quick User Guide
Copyright
©
2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
Page 1 of 2
For detailed information please consult the Star2Star Phone
and Features Guide, available for view/download via the
Star2Star Web Portal at:
https://portal.star2star.com/
BASIC FEATURES
MAKING A CALL
Using the handset:
1. Pick up the handset.
2. Enter the number, then press the
Send
soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, then press the
Send
soft key.
Using the headset:
1. With the headset connected, press
to activate the
headset mode.
2. Enter the number, and then press the
Send
soft key.
Note:
During a call you may alternate between headset,
hands-free speakerphone and handset modes by pressing the
Headset key or Speakerphone key or by picking up the
handset. Headset mode requires a headset be connected to
the phone.
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Note:
You may ignore an incoming call by pressing the
Reject
soft key.
ENDING A CALL
Using the handset:
Hang up the handset or press the
Cancel
soft key.
Using the speakerphone:
Press
or the
Cancel
soft key.
Using the headset:
Press the
Cancel
soft key.
REDIAL
Press
to enter the
Dialed Calls
list. Press
or
to select the desired call, then press
or the
Send
soft
key.
Press
twice when the phone is idle to call the last dialed
number.
MUTING A CALL
Press
to mute the microphone during a call.
Press
again to un-mute the call.
VOLUME ADJUSTMENT
Press
during a call to adjust the receiver volume of
the handset/speakerphone/headset.
Press
when the phone is idle to adjust the ringer
volume.
RING TONE
1. Press the
Menu
soft key when the phone is idle, then select
Settings > Basic Settings > Ring Tones.
2. Press
or
to select the desired ring tone.
3. Press
Save
soft key to accept the change.
PUTTING A CALL ON HOLD
Press
or the
Hold
soft key during an active call.
If there is only one call on hold, press
or the
Resume
soft key.
If there is more than one call on hold, press
or
to
select the desired call, then press
or the
Resume
soft
key.
TRANSFERING A CALL
There are three ways to transfer a call: Blind Transfer,
Attended Transfer and Semi-Attended Transfer.
SIP-T26P
IP
Phone
Quick User Guide
1 LCD Screen
2 Power LED
3 Line Keys
4 Memory Keys
5 MESSAGE Key
6 HEADSET Key
7 HOLD Key
8 TRAN Key
9 MUTE Key
10 Speakerphone Key
11 Redial Key
12 CONF Key
13 Volume Key
14 Key Pad
15 Scroll Keys
16 Soft Keys
