Recovery mode on Yealink IP phones
4
Getting started for W52P
Before using recovery mode to get your W52P ready. You should obtain the firmware
of the IP phone and rename it, install a DHCP server and TFTP download server.
Configuring the DHCP Server for W52P
This session shows how to configure a DHCP server for windows using tftpd32
application. You can download the tftpd32 application from web at:
http://tftpd32.jounin.net/tftpd32_download.html. If there is a DHCP server existed in
your network and have the same network segment like below, you can skip this session
and go to next.
Parameter
Default Value
Gate Way IP
192.168.0.1
Net Mask
255.255.0.0
DECT IP
192.168.0.100
TFTP Server IP
192.168.0.23
1.
Configure the local IP address of PC with 192.168.0.1.
2.
Double click the tftpd32.exe to start the application.
3.
Click the
button to configure the DHCP server.
4.
Configure the DHCP server like below and then press OK to save the modification.
