Yealink W80, Руководство администратора

Страница: 21 / 260

First Steps
18
LAN LED ROLE LED DECT LED Description
Green Orange Green First-level base station connected
Green Orange Off No connected base on the DM
Green
Slowly flashing
orange (1s)
Green Active calls in the system
Fast flashing green
(0.5s)
Fast flashing
green(0.5s)
Fast flashing green
(0.5s)
Firmware update in progress
Finding the MAC Address and IP Address of the Device
You can find the MAC address and IP address of all Yealink DECT devices in the LAN through a PC scanning tool -
Yealink Discovery Tool. Ask the distributor or Yealink FAE for the tool.
Procedure
1.
Run the scanning tool.
2. Enter the IP search rules.
Follow the following rules:
The first two digits : match the first two digits of your IP network segment.
The last two digits : indicate the search rule for the last two digits of the IP network segment. The dash “-” can be
used to match a range of digits. The comma “,” can be used as a separator.
Example :
a. Enter 10.81.6. 1-254 to search all network segments with 10.81.6. xx ;
b. Enter 10.81. 1,6 . 1-254 to search all network segments with 10.81. 1.xx and 10.81. 6.xx .
3. Click Scan .