Yealink W80, Руководство администратора

Страница: 166 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System
163
Web UI Directory > Settings > Search Source List In Dialing
Parameter search_in_dialing.ldap.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically search entries from the LDAP, and display results on
the pre-dialing/dialing screen.
Permitted
Values 0 -Disabled
1 -Enabled
Default 0
Web UI Directory > Settings > Search Source List In Dialing
Parameter search_in_dialing.ldap.priority <y0000000000xx>.cfg
Description It configures the search priority of the LDAP.
Permitted
Values
Integer greater than or equal to 0
Default 4
Web UI Directory > Settings > Search Source List In Dialing
Call Display
By default, the phones present the contact information when receiving an incoming call, dialing an outgoing call or
engaging in a call.
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use the Calling Line
Identification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact’s iden-
tity.
Topic
Call Display Configuration
Call Display Configuration
The following table lists the parameters you can use to configure the call display.
Parameter phone_setting.called_party_info_display.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the local identity when it receives an incoming call.
Note : The information display method is configured by the parameter “phone_setting.call_info_dis-
play_method”.
Permitted
Values 0 -Disabled
1 -Enabled
Default 1
Web UI Settings > Call Display > Display Called Party Information
Parameter phone_setting.call_info_display_method <y0000000000xx>.cfg
Description
It configures the call information display method when the phone receives an incoming call, dials an
outgoing call or is during a call.