Yealink W73P, Быстрый старт, Страница: 11 / 32

7
E
N
G
L
I
S
H
Network Settings
You can configure the base station to obtain network settings in one of the
following ways:
DHCP
By default, the base station attempts to contact a DHCP server in your
network to obtain the valid network settings, such as IP address, subnet
mask, gateway address and DNS address.
Static
If the base station cannot contact a DHCP server for any reason, you need
to configure the IP address, subnet mask, gateway address, primary DNS
address and secondary DNS address for the base station manually.
To configure the network parameters for the base station manually:
1. Press the key to enter the main menu, and then select
Settings
-
>
System Settings
->
Network
(default PIN: 0000)->
Basic
.
2. Select the desired IP addressing mode from the
IP Mode
field.
3. Press to select the desired IP addressing mode.
4. Make the desired changes.
5.
Press the
Save
soft key to accept the change.
Note:
• The DECT IP phone supports either or both IPv4 and IPv6 addressing
modes, but IPv6 is disabled by default.
• Wrong network settings may result in inaccessibility of your phone and may
affect the network performance. Contact your system administrator for the
network parameters.
Basic Operations
Turning Handset On/Off
To turn the handset on, do one of the following:
• Press , wait until the LCD screen lights up.
• Place the handset in the charger cradle. The handset will be turned on
automatically.