Yealink W60P Telesystem, Руководство администратора

Страница: 94 / 264

Handset Customization
87
The following table lists the parameter you can use to configure time and date manually.
Parameters local_time.manual_time_enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to obtain time and date from manual settings.
Permitted Values
0 -Disabled (obtain time and date from NTP server)
1 -Enabled (obtain time and date from manual settings)
Default 0
Web UI Settings->Time&Date->Manual Time
Time and Date Format Configuration
You can customize the time and date by choosing between a variety of time and date formats, including options to
date format with the day, month, or year, and time format in 12 hours or 24 hours, or you can also custom the date
format as required.
The following table lists the parameters you can use to configure time and date format.
Parameter custom.handset.time_format <y0000000000xx>.cfg
Description
It configures the time format for all registered handsets.
Note: It works only if “static.auto_provision.handset_configured.enable” is set to 1 (Enabled).
Permitted
Values
0 -Hour 12, the time will be displayed in 12-hour format with AM or PM specified.
1 -Hour 24, the time will be displayed in 24-hour format (for example, 2:00 PM displays as 14:00).
Default 1
Web UI Settings->Time&Date->Time Format
Handset UI OK->Settings->Display->Time Format
DD Phone
UI
Menu->Settings->Basic Settings->Time&Date->Time & Date Format->Date Format
Parameter custom.handset.date_format <y0000000000xx>.cfg
Description
It configures the date format for all registered handsets.
Note : The value configured by the parameter “lcl.datetime.date.format” takes precedence over that con-
figured by this parameter.
Permitted
Values
0 -WWW MMM DD
1 -DD-MMM-YY
2 -YYYY-MM-DD
3 -DD/MM/YYYY
4 -MM/DD/YY
5 -DD MMM YYYY
6 -WWW DD MMM
Use the following mapping:
“WWW” represents the abbreviation of the week;