Yealink W60P Telesystem, Руководство администратора

Страница: 145 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones
138
Area Code Configuration
The following table lists the parameters you can use to configure area code.
Parameter dialplan.area_code.code <y0000000000xx>.cfg
Description
It configures the area code to be added before the entered numbers when dialing out.
Example :
dialplan.area_code.code = 0592
Note : The length of the entered number must be between the minimum length configured by the para-
meter “dialplan.area_code.min_len” and the maximum length configured by the parameter “dialplan.area_
code.max_len”.
Permitted
Values
String within 16 characters
Default Blank
Web UI Settings->Dial Plan->Area Code->Code
Parameter dialplan.area_code.min_len <y0000000000xx>.cfg
Description It configures the minimum length of the entered number.
Permitted
Values
Integer from 1 to 15
Default 1
Web UI Settings->Dial Plan->Area Code->Min Length (1-15)
Parameter dialplan.area_code.max_len <y0000000000xx>.cfg
Description
It configures the maximum length of the entered number.
Note : The value must be larger than the minimum length.
Permitted
Values
Integer from 1 to 15
Default 15
Web UI Settings->Dial Plan->Area Code->Max Length (1-15)
Parameter dialplan.area_code.line_id <y0000000000xx>.cfg
Description
It configures the desired line to apply the area code rule. The digit 0 stands for all lines. If it is left blank,
the area code rule will apply to all lines on the IP phone.
Note : Multiple line IDs are separated by commas.
Permitted
Values
0 to 8
Default Blank
Web UI Settings->Dial Plan->Area Code->Account
Block Out Configuration
The following table lists the parameters you can use to configure block out.
Parameter
dialplan.block_out.number.X
[1]
<y0000000000xx>.cfg