Yealink W60P Telesystem, Руководство администратора

Страница: 144 / 264

Call Features
137
Dial Now Configuration
You can configure dial now rules either one by one or in batch using a dial now template.
The following table lists the parameters you can use to configure dial now.
Parameter
dialplan.dialnow.rule.X
[1]
<y0000000000xx>.cfg
Description
It configures the dial now rule (the string used to match the numbers entered by the user).
When entered numbers match the predefined dial now rule, the IP phone will automatically dial out the
numbers without pressing the send key.
Example :
dialplan.dialnow.rule.1 = 123
Permitted
Values
String within 511 characters
Default Blank
Web UI Settings->Dial Plan->Dial Now->Rule
Parameter
dialplan.dialnow.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the dial now rule. The digit 0 stands for all lines. If it is left blank, the
dial-now rule will apply to all lines on the IP phone.
Note : Multiple line IDs are separated by commas.
Permitted
Values
0 to 8
Default Blank
Web UI Settings->Dial Plan->Dial Now->Account
Parameter phone_setting.dialnow_delay <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the IP phone will automatically dial out the
entered number after the designated delay time.
If it is set to 0, the IP phone will automatically dial out the entered number immediately.
Permitted
Values
Integer from 0 to 14
Default 1
Web UI Features->General Information->Time Out for Dial Now Rule
Parameter dialplan_dialnow.url <y0000000000xx>.cfg
Description
It configures the access URL of the dial now template file.
For customizing dial now template file, refer to Dial Now File Customization .
Permitted
Values
String within 511 characters
Default Blank
[1]
X is from 1 to 20.