Yealink W59R, Руководство пользователя

Страница: 14 / 47

| Handset Registration | 14
Entering Data
The following table describes how to enter different characters using the keypad keys:
Task Action
Switch among input modes. Press to switch among input modes.
The current input mode is displayed at the right bottom of the phone screen.
Enter letters. Press a key one or more times (depending on what input mode you’re in) to enter the
possible characters that are displayed on the keypad key.
Enter special characters.
Press to enter the space character or the following special characters: _’ ” = / \
^ ; : , . - + * # § % & @ ? ! ¿ ¡ ( ) { } [ ] < > ¥
￡
$ | ~ ¤
Press :
• If it is in the uppercase (ABC), uppercase and lowercase (Abc) or lowercase
(abc) input modes, it will provide space character and the following special
characters: . , ? ! 0
• If it is in the numeric (123) input mode, it will only provide the digit 0.
• Long press the key to enter the cha.
Delete the text.
Press or to position the cursor to the right of the text you want to delete, and then
press Delete to delete one character at a time or long press to delete all characters.
Handset Registration
You need to register your handset to a base station, if you want to use the basic functions of the DECT phone. You can
register a handset to 4 different base stations at most. You can select the desired base to use.
Note:
Up to 8 handsets can be registered to one base station.
Putting the Base Station into Registration Mode
Before registering the handset, you have to put the base station into registration mode.
Long press on the base station till the registration LED flashes.
The base station is now in registration mode.
Note: If the base station does not identify a DECT phone within 90 seconds, the registration mode will
switch off automatically.
Registering a New Handset to a Base Station
With one touch, you can quickly register your new handset to a base station.
Make sure the base station is in the registration mode, and the phone prompts "Unregistered!".
Press the
Reg soft key to register the handset.
The handset is searching for a base station in registration mode.