Yealink VC110 Скачать руководство пользователя страница 45

Страница: 45 / 159

Getting Started

Locate the Internet port on the cable hub, and connect it to the internet port on the
wall or on the switch/hub device with the supplied 2m Ethernet cable.

Note

Power over Ethernet

With the included or a regular Ethernet cable, the VC110 video conferencing endpoint
can be powered from a PoE-compliant switch or hub.

To connect the PoE:

Locate the Internet port on the cable hub, and connect it to the port on the in-line
power switch/hub with the Ethernet cable.

Note

Remove power to power off the endpoint if long time no use.

If in-line power is provided, you don‟t need to connect the cable hub to the power
adapter. Make sure the switch/hub is PoE-compliant.

Important! Do not remove power from the cable hub while it is updating firmware and

configurations.

The VC110 video conferencing endpoint

should be used with Yealink original power

adapter (12V/2A) only.

Содержание VC110
































































































































































Результаты поиска

Содержание VC110

Отзывы:

Yealink VC110, Руководство пользователя, Страница: 45 / 159

Результаты поиска

Содержание VC110

Отзывы: