Yealink VC110, Руководство пользователя

Страница: 35 / 159

Overview
23
You can use the remote control and display device to configure and use the VC110
video conferencing endpoint.
For more information on the function of each key on the remote control, refer to VCR10
Remote Control on page 16 .
The Advanced option is only accessible to the administrator. The default administrator
password is “0000”. For more information on how to view, enter and edit menu settings
menu on the display device, refer to
Navigating Menus on the Display Device on page
40 and Entering Data and Editing Fields on page 40 .
You can customize your endpoint via the web user interface. To access the web user
interface, you need to know the IP address of your new endpoint.
To obtain the IP address, do one of the following:

The IP address of the endpoint is shown on the top right corner of the display
device.

Press (Menu soft key) on your remote control and select Status ->Network.
The display device shows network information about the endpoint.

Press on the video conferencing phone when the phone is idle and select
Network.
The LCD screen of the phone displays the network information of the endpoint.
Log into the web user interface:
1. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of
a web browser on your PC, and then press the Enter key.
2. Enter the administrator user name and password.
The default user name is “admin” (case-sensitive), and the default password is
“0000”.