Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
114
To configure call type via the web user interface:
1.
Click on Setting->Call Features.
2.
Select the desired value from the pull-down list of Call Type.
3.
Click Confirm to accept the change.
To configure call type via the remote control:
1.
Select Menu->Call Features ->Call Type.
2.
Select the desired value from the pull-down list of Call Type.
3.
Press the Save soft key to accept the change.
Do not Disturb allows the endpoint to reject all incoming calls automatically. You can
activate the DND mode for the endpoint when it is idle, and the DND mode will be
deactivated after the endpoint places a call. You can also activate the DND mode for
the endpoint during a call, and the DND mode will be deactivated after the endpoint
ends the call.
The DND parameter on the endpoint is described below:
Parameter
Description
Configuration Method
DND
Enables or disables DND mode
on the endpoint.
Default: Disabled
Remote Control
Web User Interface
Содержание VC110
