Call Hold and Resume
To place a call on hold:
To resume a call, do one of the following:
If there is only a call on hold, press the
Resume
soft key.
Press the
Options
soft key during a call, and select
Hold
.
If there are two calls on hold, press the
Resume
soft key to resume the current call,
press the
Swap
soft key
to swap between the two calls.
For more information, refer to the User guide available online at:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142
.
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
Semi-Attended Transfer
Attended Transfer
Call Forward
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press the
Options
soft key during a call, and select
Blind Transfer
.
1. Press the
Options
soft key during a call, and select
Transfer
.
1. Press the
Options
soft key during a call, and select
Transfer
.
2. Enter the number you want to transfer the call to.
3. Press the
Transfer
soft
key to dial out.
To enable the call forward feature on a specific line:
Always----
Incoming calls are forwarded immediately.
Busy----
Incoming calls are forwarded when the handset is busy.
No Answer----
Incoming calls are forwarded if not answered after a period of time.
1. Press the
OK
key to enter the main menu, and select
Call Features
->
Call Forward
.
3. Press or to highlight the desired forwarding type, and press the
OK
soft key.
5. Enter the number you want to forward the incoming calls to in the
Target
field.
7. Press the
Save
soft key to accept the change.
2. Enter the number you want to transfer the call to.
4. Press
the
Transfer
soft key when you hear the ring-back tone.
3. Press the
Transfer
soft key.
2. Enter the number you want to transfer the call to.
3. Press the
Transfer
soft key to dial out.
4. Press the
Transfer
soft key after the call is answered.
2. Press or to highlight the desired line, and press the
OK
soft key.
4. Select
Enabled
from the
Status
field.
6. Press
or
to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the
After Ring Time
field.
Call Mute
Press
during a call to mute the call.
Press
again to un-mute the call.
Quick Reference Guide
www.yealink.com
Configuring your Phone
W52P & W52H
IP DECT Phone
Applies to firmware version 10 or later.
