5
2018-02-14
Configuring Algo 8061 IP Relay Controller
1)
To configure the 8061, open an empty web browser, enter the device’s IP address in the
address field, and press Enter
2)
To find the device’s IP address, please refer to the user guide available at:
http://www.algosolutions.com/8061/guide
3)
In the web interface, enter the password to log in (default password is algo)
4)
There is no need to do a separate SIP Server registration, in this scenario. Leave the SIP
Domain, Extension, Authentication ID and Authentication Password blank
5)
Navigate to Basic Settings, Door Control tab. Ensure Door Control Link is enabled and
enter a password for Door Control Password. Click save
Содержание T58V
Страница 1: ......
