Yealink T58A Teams, Руководство администратора

Страница: 24 / 116

| Device Network |
24
[1]
If you change this parameter, the device will reboot to make the change take effect.
DHCP VLAN Configuration
Yealink Teams devices support VLAN discovery via DHCP. When the VLAN discovery method is set to
DHCP, the device will examine the DHCP option for a valid VLAN ID. The predefined option 132 is used to
supply the VLAN ID by default. You can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
Parameter static.network.vlan.dhcp_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the DHCP VLAN discovery feature on the device.
Permitted Values
0 -Disabled
1 -Enabled.
Default
1
Web UI Network > Advanced > DHCP VLAN > Active
Phone UI
> Settings > Device Settings > Network (default password: admin) > DHCP
VLAN
Parameter static.network.vlan.dhcp_option
[1]
<y0000000000xx>.cfg
Description
It configures the DHCP option from which the device obtains the VLAN settings.
You can configure at most five DHCP options and separate them by commas.
Permitted Values
Integer from 1 to 255
Default 132
Web UI Network
>
Advanced
>
DHCP VLAN
>
Option(1-255)
Phone UI
>
Settings
>
Device Settings
>
Network (default password: admin)
>
DHCP
VLAN
>
Option
[1]
If you change this parameter, the device will reboot to make the change take effect.
VLAN Change Configuration
The following table lists the parameter you can use to configure the VLAN change.
Parameter static.network.vlan.vlan_change.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the device to obtain VLAN ID using lower preference of VLAN
assignment method or to close the VLAN feature when the device cannot obtain VLAN ID
using the current VLAN assignment method.
The priority of each method is LLDP/CDP > Manual > DHCP VLAN.
Permitted Values 0
-Disabled
1
-Enabled, the device will attempt to use the lower priority method when failing to obtain
the VLAN ID using a higher priority method. If all the methods are attempted, the device will
disable the VLAN feature.