Yealink T5 Series Скачать руководство пользователя

Страница: 153 / 472

Phone Customization

147

Note

: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable” are set to 1

(Enabled). It is not applicable to CP960 phones.

Permitted

Values

String

Default

EDK Prompt

[1]

X is the prompt ID. X=1-10.

EDK Soft Keys Configuration

You can customize the soft keys as need. This feature is typically used to access frequently-used functions or to create

menu shortcuts to frequently-used phone settings.

Custom soft keys can be added in the following phone states:

Idle

- There are no active calls on the phone.

Alerting (or ringing)

– There is an incoming call on the phone.

Connecting

– There is an outgoing call on the phone. Moreover, the call is connecting.

Transfer connecting

– There is a call being transferred to another phone. Moreover, the call is connecting.

Talk

– There is an active call on the phone.

Call failed

– The outgoing call encounters a failure.

Ring back

- There is an outgoing call on the phone. Moreover, the phone is in the ringback state.

Transfer ring back

- There is a call being transferred to another phone. Moreover, the phone is in the ringback

state.

Hold

– The call is placed on hold on the phone.

Held

– The call is held.

Conference

– The phone sets up a conference call.

Note

Configuring the custom soft keys may affect the softkey layout in different call states. For more information on softkey lay-

out, refer to

Softkey Layout

The following table lists the parameters you can use to configure EDK soft keys.

Parameter

softkey.X.enable

[1]

<y0000000000xx>.cfg

Description

It enables or disables the custom soft key X.

Note

: It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled). It is not applicable to

CP960 phones.

Permitted

Values

-Disabled

-Enabled

Default

Parameter

softkey.X.label

[1]

<y0000000000xx>.cfg

Description

It configures the text displayed on the soft key label.

Note

: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).

It is not applicable to CP960 phones.

Permitted

Values

String

Содержание T5 Series

























































































































































































































































































































































































































































































Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды

Yealink T5 Series, Руководство администратора

Результаты поиска

Содержание T5 Series

Отзывы:

Похожие инструкции для T5 Series

Бренды по названию

Популярные бренды