Call Features
26
Deactivating DND
You can deactivate DND when you are ready to resume receiving calls again.
Procedure
1.
Go to
Menu
>
Features
>
DND
.
2.
(Optional.) If the DND is activated on a specific line, select the desired line.
3.
Turn off DND.
4.
Select
Save
.
The DND icon disappears from the status bar.
Tip
: To deactivate DND quickly, press the
DND
soft key when the phone is idle.
You can press the
All Off
soft key to deactivate DND for all lines.
Ending Calls
You can end the current call at any time.
Procedure
1.
Do one of the following:
l
If you are using the handset, press the Cancel key,
End Call
(
EndCall
) or hang up the handset.
l
If you are using the headset, press the Cancel key or
End Call
(
EndCall
).
l
If you are using the speakerphone, press the Cancel key, Speakerphone key or
End Call
(
EndCall
).
Tip
: You can press the HEADSET key to end calls. Check with your system administrator to find out if it is available on your
phone.
Redialing a Call Automatically
You can set the phone to redial a phone number automatically when you call a contact and the contact’s line is
unavailable.
Procedure
1.
Go to
Menu
>
Features
>
Auto Redial Setting
.
On the T33P/T33G phones, go to
Menu
>
Features
>
Others
>
Auto Redial Setting
.
2.
Select
Enabled
from the
Auto Redial
field.
3.
Enter the desired time (between 1 and 300 seconds) in the
Redial Interval
field.
4.
Enter the desired times (between 1 and 300) in the
Redial Times
field.
5.
Select
Save
.
When you dial a number but fail to establish a call, the phone prompts whether to auto redial the contact, select
OK
to activate auto redial.