Yealink T19P-E2, Руководство по настройке

Страница: 44 / 92

Yealink IP Phones Configuring Guide
34
You can set a waiting time to lock the phone automatically. If the waiting time is set to 0, the
phone will not be automatically locked. You need to lock the phone manually.
Note
The Volume key, HEADSET key and Speakerphone key are always available when you lock the
phone.
Configuring the Keypad Lock
You can configure keypad lock type via CommPortal phone configurator. This is not applicable
to SIP-T56A, SIP-T58A/V, CP960, SIP-T57W, SIP-T48S and W60B phones.
To configure the keypad lock via CommPortal phone configurator:
1.
Click
Preferences
->
KeyPad Lock
.
2.
Mark the
Enabled
radio box of the
KeyPad Lock Enabled
field.
3.
Select the desired type from the
KeyPad Lock Type
field.
4.
Enter the unlock PIN in the
Phone Unlock PIN
field.
5.
Enter the desired interval of automatic phone lock in the
Lock Time Out
field.
The default timeout is 0. It means the phone will not be automatically locked. the phone
will be locked when the inactive time reaches the designated time (in seconds).
6.
Enter the emergency number in the
Emergency Phone Number
field.
You can dial an emergency number even when the phone is locked.
7.
Click
Save changes
to accept the change.
8.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Downloading Configuration
Files on page 39 .
Note
The emergency number setting, if desired, must be set before lock activation.
You can dial the emergency number even though the phone is locked.
Unlocking the Phone
To unlock the phone via phone user interface:
1.
Press any locked key.