Yealink SIP-T52S
Media IP Phone
Quick Reference User Guide
Page 4 | Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
CREATE A CONFERENCE CALL
1.
Press the
Conf
soft key during an active call. The call is then placed on hold.
2. Enter the extension or external number of the second party, then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party has answered the call.
•
All parties are now joined in the conference call.
4. Press the
EndCall
soft key to disconnect all parties.
PLACE A CALL ON HOLD & THEN RESUME THE CALL
To place a call on hold:
1.
Press the
Hold
soft key during an active call.
To resume a call from hold:
1.
Press the
Resume
soft key when a call is on hold.
If there is more than 1 call on hold:
1.
Press
or
to select the desired held call, then press
or press the
Resume
soft key to retrieve the
desired call.
ADD A NEW CONTACT
1.
Press the
Directory
phone is idle, and then select
All Contacts
.
2. Tap
Add.
3. Enter the contact’s
Name
and
Number.
4. Tap
Save
to accept the change.
MUTE OR UN-MUTE A CALL
1.
Press
to mute or un-mute an active call.
ACCESS VOICEMAIL
1.
Press the
Connect
soft key or press
.
2. Follow the voice prompts to listen to your voice messages
3. To access another Extension’s Voicemail, dial 778, enter the Extension number and its associated PIN
BARGE IN/LISTEN IN*
1.
When Call Barge is enabled, a user can dial 88 followed by the extension number and be connected to an
active call.
•
The following options are available when connected to an active call:
•
Press 1 to speak to the call Receiver
•
Press 2 to speak to the call Originator
•
Press 3 to speak to both
•
Press 0 to listen only
RECORD CALL*
1.
When on an active call, press #8 to commence/end recording.
*Some features may require activation in your portal prior to use.
How to (cont...):