Yealink SIP-T5 Series, Руководство администратора

Страница: 534 / 572

Configuration Parameters
531
Default
1
Parameter sip.sdp_early_answer_or_offer
<y0000000000xx>.cfg
Description
It enables or disables the phone to generate an SDP Offer or Answer message when receiving a reli-
able provisional response or PRACK request and response.
Permitted
Values 0-Disabled
1-Enabled
Default 0
Parameter sip.reliable_protocol.timerae.enable <y0000000000xx>.cfg
Description
It enables or disables the timer for ict and nict when TCP protocol is used.
Note: This parameter can be used for fast failover purpose when TCP connection fails.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter sip.mac_in_ua <y0000000000xx>.cfg
Description It enables or disables the phone to carry the MAC address information in the User-Agent header.
Permitted
Values
0-Disabled
1-Enabled, the phone will carry the MAC address with colons (for example 00:15:65:7f:fb:7e ) in the
User-Agent header.
2-Enabled, the phone will carry the MAC address without colons (for example 0015657ffb7e ) in the
User-Agent header.
Default
0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Call Settings Parameters
Parameter phone_setting.show_code403 <y0000000000xx>.cfg
Description
It configures the display message on the phone screen when receiving a 403 message.
If it is left blank, the phone will display the value sent from the server when receiving the 403 mes-
sage.
Permitted
Values
String within 99 characters
Default Blank
Parameter
phone_setting.incoming_call_when_dial-
ing.priority
<y0000000000xx>.cfg
Description It enables or disables the phone to interrupt the user operation when there is an incoming call.
Permitted
Values
0-Disabled, the phone will not prompt the incoming call information when the user is dialing or select-
ing a contact from the directory/call log lists to transfer a call/to set up a conference/to place a new
call.
1-Enabled, the phone will return to the dialing screen if there is an incoming call arrives when the
user selects a contact from the directory/call log lists to transfer a call/to set up a conference with/to