Yealink SIP-T5 Series, Руководство администратора

Страница: 382 / 572

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
379
When the phone receives an incoming call in the call state, the screen does not prompt the incoming call inform-
ation. You can perform other features on the current call. You can only answer the incoming call after ending the cur-
rent call.
Topic
Ignoring Incoming Calls Configuration
Ignoring Incoming Calls Configuration
The following table lists the parameter you can use to configure ignoring incoming calls.
Parameter features.ignore_incoming_call.enable <y0000000000xx>.cfg
Description It enables or disables the phone to ignore the incoming call.
Permitted
Values
0-Disabled
1-Enabled, the incoming call is still in the progress and is not rejected, the user can choose to answer
it or not, or perform other features.
Default 0
Off Hook Answering
You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone key or
pressing the HEADSET key directly.
It is not applicable to CP920 phones.
Topic
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to answer an incoming call by picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key directly.
Permitted
Values
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or the OK key to
answer an incoming call after picking up the handset, pressing the Speakerphone key or pressing the
HEADSET key.
1-Enabled