Yealink SIP-T5 Series, Руководство администратора

Страница: 87 / 572

Phone Provisioning
84
Note: It has a lower priority than the value defined by the parameter “static.auto_provision.attempt_
expired_time”.
Permitted
Values
Integer from 1 to 20
Default 10
Parameter static.auto_provision.attempt_before_failed <y0000000000xx>.cfg
Description
It configures the maximum number of attempts to transfer a file before the transfer fails during auto pro-
visioning.
Permitted
Values
Integer from 1 to 10
Default 3
Parameter static.auto_provision.retry_delay_after_file_transfer_failed <y0000000000xx>.cfg
Description
It configures the time (in seconds) to wait after a file transfer fails before retrying the transfer via auto
provisioning.
Permitted
Values
Integer from 0 to 300
Default 5
Parameter static.auto_provision.reboot_force.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to reboot after auto provisioning, even if there is no specific con-
figuration requiring a reboot.
Note: It works only for the current auto provisioning process. If you want the phone to reboot after
every auto provisioning process, the parameter must be always contained in the configuration file and
set to 1.
If the phone reboots repeatedly after it is set to 1, you can try to set “static.auto_provision.power_on" to
0 (Off).
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter features.action_uri_force_autop <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call for triggering auto provisioning immediately when
receiving an HTTP or HTTPS GET request with the variable value set to AutoP during a call.
Note: It works only if “features.action_uri.enable” is set to 1 (Enabled).
Permitted
Values 0-Disabled, the phone triggers auto provisioning after the call.
1-Enabled
Default 0
Parameter static.auto_provision.power_on <y0000000000xx>.cfg
Description It triggers the power on feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs auto provisioning when powered on.
Default 1
Web UI Settings > Auto Provision > Power On