Yealink SIP-T5 Series, Руководство администратора

Страница: 133 / 572

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
130
The outgoing line for handset 4 is line 4.
The outgoing line for handset 5 is line 5.
Web UI Account > Number Assignment > Outgoing lines
Parameter handset.X.dial_out_default_line
[1]
<y0000000000xx>.cfg
Description It configures the default line to place outgoing calls for a specific handset.
Permitted
Values
Integer from 1 to 5
Default
X
Supported
Devices
All handsets except CP930W
Web UI Account > Number Assignment > Outgoing lines > Default
Handset UI
W53H/W56H:
OK > Settings > Telephony > Default Line
[1]
X is the handset ID. X=1-5.
End Call on Hook
You can configure whether to end a call when you place the handset into the charging cradle.
Topic
End Call on Hook Configuration
End Call on Hook Configuration
The following table lists the parameter you can use to configure the end call on hook.
Parameter phone_setting.end_call_on_hook.enable <y0000000000xx>.cfg
Description It enables or disables to end a call when placing the handset into the charger cradle.
Permitted
Values
0-Never
1-Always
Default 1
Supported
Devices
W53H, W56H
Web UI
Features > General Information > End Call On Hook
Advisory Tones
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states.
It is not applicable to DD phones.
You can configure the following advisory tones independently for each other:
l
Keypad Tone: plays when you press any key of the keypad. For CP930W, you can only configure it by nav-
igating to Menu > Settings > Basic Settings > Sound > Advisory Tones > Keypad Tone.
l
Touch Tone: plays when you tap the keys (except the off-hook key and the touch keypad). You can only con-
figure it by navigating to Menu > Settings > Basic Settings > Sound > Advisory Tones > Touch Tone. It is only
applicable to CP930W.