Yealink SIP-T40P, Руководство пользователя

Страница: 117 / 188

Basic Call Features
105
Attended Transfer
Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode on DSS key is configured as
New Call
or
Attended Transfer
. For more
information on how to configure it, refer to Configuring Transfer Mode on DSS Key on page
123 .
To perform an attended transfer:
1.
Press the
Tran
soft key during a call.
2.
Do one of the following:
-
Enter the number you want to transfer to.
Press or to dial out.
-
Press the
Dir
soft key, and then select
Local Directory
. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to Directory
on page 37 for more information).
Press , or the
Send
soft key to dial out.
-
Press the
Dir
soft key, and then select
History
. Select the desired list and then press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 37 for more information).
Press , or the
Send
soft key to dial out.
-
Press the
Dir
soft key, and then select
Remote Phone Book
. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 37 and Remote Phone Book on page 49 for more information).
Press , or the
Send
soft key to dial out.
-
If
Allow Trans Exist Call
(refer to Allow Trans Exist Call on page 101 ) is enabled, you
can select the
NewCall
and repeat steps mentioned above to complete transfer.
3.
After the party answers the call, press the
Tran
soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the
Cancel
soft key.
Call Waiting
You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.