Yealink SIP-T38G, Руководство администратора

Страница: 74 / 402

Configuring Basic Features
61
To configure the send key via phone user interface:
1. Press Menu->Features->Key as Send.
2. Press or , or the Switch soft key to select "#" or "*" from the Key as Send
field, or select Disable to disable this feature.
3. Press the Save soft key to accept the change.
Note
A hotline is a point-to-point communications link in which a call is automatically directed
to the preset hotline number. The IP phone automatically dials out the hotline number
using the first available line after a time interval when the IP phone is off-hook. The IP
phone only supports one hotline number.
Procedure
Hotline can be configured using the configuration files or locally.
Configuration File <y0000000000xx>.cfg
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
For more information, refer to
Hotline on page 247 .
Local
Web User Interface
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
cgiServer.exx?page=Phone-Feat
ures.htm
Phone User Interface
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
To configure hotline via web user interface:
1. Click on Phone->Features->General Information.
The send tone feature works only if the key tone feature is enabled. The key tone feature
is enabled by default.