Yealink IP Phones Auto provisioning Guide
104
Parameter
Permitted Values
Descriptions
Web Setting Path
screen before displaying the caller ID when
performing a semi-attended transfer.
0-Enabled
1-Disabled
The default value is 1.
Transfer
transfer.blind_tran_on_hook_enable =
0 or 1
It enables or disables the phone to
complete the blind transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer ->Blind Transfer On
Hook
transfer.on_hook_trans_enable =
0 or 1
It enables or disables the phone to
complete the attended transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer ->Semi Attend
Transfer On Hook
transfer.dsskey_deal_type =
(not applicable to CP860 IP phones)
0, 1 or 2
It configures the DSS key behavior during an
active call when user presses the DSS key
and the DSS key is configured as a speed
dial, transfer or BLF/BLF list key.
Features->Transfer ->Transfer Mode
Via Dsskey
Содержание SIP-T2XP
