Getting Started
13
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays “Initializing, Please wait…” during this process.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by
default.
Note
You can view the system status of your phone via phone user interface or web user
interface.
Available information of phone status includes:
Network status (e.g., IPv4 status, IP mode, MAC address, LAN type, LAN IP and LAN
mask).
Phone status (e.g., device model, hardware version, firmware version, product ID,
MAC address and device certificate status).
Account status (e.g., the register status of SIP accounts).
Note
To view the phone status via phone user interface:
1.
Press , or press Menu->Status.
2.
Press or to scroll through the list and view the specific information.
To view the phone status via web user interface:
1.
Open the web browser on your computer.
If your network does not use DHCP, proceed to
Basic Network Settings
on page
14
.
You can view device certificate status via phone user interface only.
Содержание SIP-T22
Страница 1: ......
Страница 8: ...User Guide for the SIP T22P SIP T22 IP Phone viii...
Страница 12: ...User Guide for the SIP T22P SIP T22 IP Phone xii...
Страница 130: ...User Guide SIP T22P SIP T22 IP Phone 118...