Yealink SIP-T2 Series, Руководство администратора

Страница: 910 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
888
’
If the camera is properly connected to the IP phone but there are no images on the
screen when you press the VIDEO key, you may need to replace the camera.
If the camera lens is oily or soiled, there may be some dazzle light on the images.
Please try to clean it up.

Ensure that the HDMI cable is plugged into the HDMI port on the IP phone and the
HDMI cable is not loose.

Ensure that the HDMI cable is not damaged.
Ensure the IP phone and your gateway/ router are within the working range and there is
no obvious interference (walls, doors, etc.) between them.
’
If you successfully connect the IP phone to the 2.4G/5G wireless network, but the video
images is not smooth. Or, you cannot connect the IP phone to the 2.4G/5G wireless
network.

Check if there are too many wireless devices connecting to the same 2.4G/5G
wireless network.

Verify whether the distance between IP phone and the wireless router is too far.
’
Try to delete the registration information of the Bluetooth device on both IP phone and
Bluetooth device, and then pair and connect it again. Contact Yealink field application
engineer and your Bluetooth device manufacturer for more information.