Yealink SIP-T2 Series, Руководство администратора

Страница: 150 / 1009

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
128
To configure the backlight via phone user interface (take SIP-T46G IP phones for
example):
1. Press Menu->Basic->Display->Backlight.
2. Press or , or the Switch soft key to select the desired level from the
Backlight Active Level field.
3. Press or , or the Switch soft key to select the desired value from the
Backlight Inactive Level field.
4. Press or , or the Switch soft key to select the desired time from the
Backlight Time field.
5. Press the Save soft key to accept the change.
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32
feet). The best performance is in the 1 to 2 meter (3 to 6 feet) range. You can
activate/deactivate the Bluetooth mode and then pair and connect the Bluetooth
headset with your phone. It is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP
phones. You can also activate/deactivate the Bluetooth mode and then pair and
connect the Bluetooth-Enabled mobile phone for Yealink SIP VP-T49G IP phones. For
more information, refer to the
Yealink_SIP_VP-T49G_User_Guide
.
You can personalize the Bluetooth device name for the IP phone. The pre-configured
Bluetooth device name will display in scanning list of other devices. It is helpful for the
other Bluetooth devices to identify and pair with your IP phone.
Note
Procedure
Bluetooth mode can be configured using the configuration files or locally.
Configuration File <y0000000000xx>.cfg
Configure Bluetooth mode.
Parameter:
features.bluetooth_enable
Configure the Bluetooth device
name.
Parameter:
features.bluetooth_adapter_nam
e
Local Web User Interface
Configure Bluetooth mode.
Navigate to:
To use this feature on SIP-T48G/T46G/T29G IP phones, make sure the Bluetooth USB
dongle is properly connected to the USB port on the back of the phone.