Yealink SIP-T19 E2 T4 Series, Начало работы, Страница: 3 / 17

Recovery Mode on Yealink IP phones
3
Phone Model The Resource Files Required Description
SIP-T58A T58V.rom, T58V.bin, T58V.rfs
Note : New factory phones
running V86 firmware version no
longer need “
.bin
” and “
.rfs
” files.
MP54 MP54.rom, MP54.bin
MP56 MP56.rom, MP56.bin
MP58 MP58.rom, MP58.bin
CP860 CP860.rom, CP860.bin and CP860.rfs
CP920 CP920.rom, CP920.bin and CP920.rfs
Note : New factory phones
running V86 firmware version no
longer need “ .bin ” and “ .rfs ” files.
CP960 CP960.rom, CP960.bin and CP960.rfs
Note
: New factory phones
running V86 firmware version no
longer need “ .bin ” and “ .rfs ” files.
VC400 VCS.rom, VCS.bin and VCS.rfs
VC120 VCS.rom, VCS.bin and VCS.rfs
VC110 VC110.rom, VC110.bin and VC110.rfs
Base for
W52P/W56P
W52P.rom, W5X.bin, and W5X.rfs
W60B W60B.rom, W60B.bin and W60B.rfs
W80DM/W80B W80B.rom, W80B.bin and W80B.rfs
W90DM/W90B W90B.rom and W90B.bin
Configuring the HTTP Server
This section shows how to configure a HTTP server for the windows system using the HFS tool. You can
download the HFS software online: http://www.snapfiles.com/get/hfs.html . If there is a HTTP server
installed on your local system, you can skip this section and go to the next.
Procedures
1. Create an HTTP root directory on the local system.
2. Place resource files to this root directory.
3. Double click the hfs.exe to start the application.
The main configuration page is shown as below: