Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 8 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
viii
This brief section describes the conventions used in the summary table and configuration
parameter table. In order to read the tables and successfully perform configuration changes, an
understanding of these conventions is necessary.
Summary Table Format
The following summary table indicates three provisioning methods (central provisioning, web
user interface and phone user interface, refer to
Provisioning Methods for more information)
you can use to configure a feature. Note that the type of provisioning methods available for
each feature varies; not every feature uses all these three methods.
The central provisioning method requires you to configure parameters located in CFG format
configuration files that Yealink provides. For more information on configuration files, refer to
Configuration Files on page 101 . As shown below, the table specifies the configuration file name
and the corresponding parameters. That is, the <MAC>.cfg file contains the
account.X.auto_answer
parameter, and the <y0000000000xx>.cfg file contains the
feature.auto_answer_delay parameter.
The web user interface method requires you to configure features by navigating to the specified
link. This navigation URL can help you quickly locate the webpage where you can configure the
feature.