Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 718 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
696
Parameters Permitted Values Default
It cannot start with a digit. This parameter must have a value, it cannot be left blank.
Example
:
edk.edklist.2.mname = macro2
Note
: If there are two or more same macros, the soft key or DSS key will invoke the macro
with a smallest value of X. It works only if the value of the parameter
“features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
edk.edklist.X.action
(X ranges from 1 to 255)
String Blank
Description:
Configures the action string that contains a macro definition of the action that the softkey or
DSS key performs.
If EDK is enabled, this parameter must have a value.
Example
:
edk.edklist.2.action = 1013$Tinvite$
Note
: It works only if the value of the parameter “features.enhanced_dss_keys.enable” is set
to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
Configuring EDK Prompt
The Enhanced DSS Keys (EDK) Prompt parameters must be used if interactivity with user is
implemented as part of any macro.
Procedure
EDK prompt can be configured using the configuration file.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure EDK prompt.
Parameters:
edk.edkprompt.X.enable
edk.edkprompt.X.label