Configuring Basic Features
185
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
phone_setting.page_tip
0 or 1
0
Description:
Enables or disables the page icon and page switch key LED to indicate different states of line
keys on the non-current page.
0
-Disabled
1
-Enabled
Note
: It is only applicable to
SIP-T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP phones.
Web User Interface:
Dsskey->Line Key->Enable Page Tips
Phone User Interface:
None
To configure the page icon to indicate status via web user interface:
1.
Click on
Dsskey
->
Line Key
.
2.
Select
Enabled
from the pull-down list of
Enable Page Tips
.
3.
Click
Confirm
to accept the change.
Page Tips for Expansion Module
You are allowed to configure the page switch key LED on the expansion module to indicate
when BLF monitored user receives an incoming call on the non-current page. It is only
applicable to EXP50 connected to the SIP-T54S/T52S IP phones.
Содержание SIP-T19 E2 T4 Series
