Setting Up Your System
89
Parameters
Permitted Values
Default
Description:
Configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note:
It works only if the value of the parameter “static.network.802_1x.mode” is set to 2
(EAP-TLS). The format of the device certificate must be *.pem.
Web User Interface:
Network->Advanced->802.1x->Device Certificates
Phone User Interface:
None
To configure the 802.1X authentication via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
802.1x
block, select the desired protocol from the pull-down list of
802.1x Mode
.
a)
If you select
EAP-MD5
:
1)
Enter the user name for authentication in the
Identity
field.
2)
Enter the password for authentication in the
MD5 Password
field.
b)
If you select
EAP-TLS
:
1)
(Optional.) Enter the anonymous user name for authentication in the
Anonymous Identity
field.
2)
Enter the user name for authentication in the
Identity
field.
Содержание SIP-T19 E2 T4 Series
