Yealink MeetingSpace VC800 Скачать руководство пользователя страница 43

Страница: 43 / 223

Getting Started

with the supplied power adapter.

The VC800 video conferencing system starts up automatically, and the indicator LED on the
VC800 codec then illuminates solid green.

Put the System to Sleep

After a certain amount of time with no activity, the VC800 video conferencing system goes into
sleep mode automatically.

Put the system to sleep via the remote control:

Press .

Press or to scroll to

Sleep

and then press

The system goes to sleep immediately. The indicator LED on the VC800 codec illuminates
solid red.

Wake the system via the remote control:

Press any button on the remote control.

The indicator LED on the VC800 codec illuminates solid green.

Wake the system via theCP960 conference phone:

Tap the touch screen or any key.

The indicator LED on the VC800 codec illuminates solid green.

Содержание MeetingSpace VC800
































































































































































































































Результаты поиска

Содержание MeetingSpace VC800

Отзывы:

Бренды по названию

Популярные бренды

Yealink MeetingSpace VC800, Руководство пользователя

Результаты поиска

Содержание MeetingSpace VC800

Отзывы:

Бренды по названию

Популярные бренды