Yealink MeetingSpace VC800, Руководство администратора

Страница: 23 / 295

VC800 Video Conferencing System Introduction
9
The web structure tree of VC800 is shown as below, (the red highlight is hidden for users with
user credentials):
You can monitor or place calls via web user interface. You can do the following in the
Home
page.

Placing or ending calls

Viewing remote and nearby sites

Enabling the mute mode or the DND mode for a call

Changing the video input source

Adjusting the position and focus of the camera

Moving local camera to a preset position

Capturing the video images

Control the video conferencing system remotely via the virtual remote control
Note
Remote Control
You can use the remote control to configure and use the VC800 video conferencing system.
The
Advanced
option is only accessible to the user with the administrator’s permission. The
default administrator password is “0000”.
Virtual Remote Control
In addition to using the remote control, you can also control the VC800 video conferencing
system via virtual remote control.
Although the web user interface is used to initiate the call, it is the video conferencing system
that is used for the call. It is not the PC running the web user interface.