Yealink MeetingSpace VC200 Скачать руководство пользователя страница 33

Страница: 33 / 232

| Getting Started |

LED Status

Description

Fast flashing red

(0.3s)

The phone is ringing.

Slow flashing red

(1s)

The phone receives a missed call.

Solid red for 0.5s

and off for 3s

alternately

The phone is in power-saving mode.

Camera Indicator LED of VP59

LED Status

Description

Solid green

The phone is powered on and the camera is available.
The camera is idle.
The phone receives an audio-only call.

Fast flashing green The phone receives a video call.
Solid red

There is an active video call.

Slowly flashing

red

The shutter switch is open, but the local video is disabled during a video call.

Off

The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.

LED Instructions of VCC22 Video Conferencing Camera

LED Status

Description

The VC880/VC800/PVT980 system is powered on.
The VC880/VC800/PVT980 is upgrading firmware.

Solid green

The VCC22 video conferencing camera is working.

The VC880/VC800/PVT980 system is in sleep mode.

Solid red

The VCC22 video conferencing camera is disabled.

Flashing red

The VCC22 video conferencing camera is upgrading firmware.

Solid orange

The VCC22 video conferencing camera is not selected.

Off

The VCC22 video conferencing camera is not connected to the PoE switch.

LED Instructions of CTP20

LED Status

Description

Solid green

VCS codec is powered on.

Содержание MeetingSpace VC200









































































































































































































































Результаты поиска

Содержание MeetingSpace VC200

Отзывы:

Yealink MeetingSpace VC200, Руководство администратора, Страница: 33 / 232

Результаты поиска

Содержание MeetingSpace VC200

Отзывы: