Yealink MeetingSpace VC200 Скачать руководство пользователя страница 115

Страница: 115 / 232

| Configuring Basic Settings |

115

Parameter

Description

Configuration Method

Microphone Mute Mode

Configure the microphone mute

mode.
•

Synchronized

- if you mute/

unmute a microphone, other

microphones will be muted/

unmuted simultaneously.

•

Separated

- if you can

only mute/unmute one

microphones, others does not

respond.

Default

: Synchronized.

Web user interface

Note:

If you use the remote control or CP960 conference phone to mute/unmute a microphone, all microphone

will be muted/unmuted simultaneously.

Configuring the Keyboard Input Method

You can use the full keyboard on the screen to enter or to edit the data. You can enter characters using the enabled

input method. On-screen keyboard on the monitor supports English and Russian input methods. This feature is not

applicable to VP59.

Procedure

On your web user interface, go to

Setting

General

General Information

Keyboard IME

Select the desired list from the

Disabled

column and click

The selected input method appears in the

Enabled

column.

Repeat step 2 to add more input methods to the

Enabled

column.

To remove a input method from the Enabled column, select the desired input method and then click

To adjust the display order of the enabled input methods, select the desired input method, and click

The input method shown at the top has the highest priority.

Configuring USB Storage

If you have high requirement for data security, you can disable the USB storage. After disabling the feature, you

cannot use the USB flash driver to store recorded videos, screenshots or captured packets.

Procedure

On your web user interface, go to

Setting

Video & Audio

USB Config

USB Enable

Configure and save the following settings:

Содержание MeetingSpace VC200









































































































































































































































Результаты поиска

Содержание MeetingSpace VC200

Отзывы:

Yealink MeetingSpace VC200, Руководство администратора, Страница: 115 / 232

Результаты поиска

Содержание MeetingSpace VC200

Отзывы: