manualshive.com logo in svg

Yealink MeetingEye 400, Руководство администратора

Поделиться
Скачать
Yealink MeetingEye 400 Скачать руководство пользователя страница 135

 | Basic Settings | 

135

• On your CTP20, tap the Mute key.
• On your CP960, tap one of the Mute keys.
• On your CP960 conference phone’s touch screen, tap the Mute key.
• On your CPE90 wired expansion microphones, tap the Mute key.
• On your CPW90-BT Bluetooth wireless microphones, tap the Mute key.

If video conferencing system is muted, the icon 

 will appear on the local video.

Configuring Microphone Mute Mode

By default, if you enable the mute mode on a single microphone (CPE90/CPW90/CPW90-BT/VCM34),
other microphones will be muted synchronously. To avoid picking up unwanted sounds from other
microphones, you can choose to mute a single microphone only, and other microphones keep unmuted.
This feature is not applicable to VP59.

Procedure

1.

On your web user interface, go to 

Setting

 > 

Video & Audio

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

Microphone Mute Mode

Configure the microphone
mute mode.

•

Synchronized

- if

you mute/unmute a
microphone, other
microphones will
be muted/unmuted
simultaneously.

•

Separated

- if you can

only mute/unmute one
microphones, others does
not respond.

Default

: Synchronized.

Web user interface

Note:

If you use the remote control or CP960 conference phone to mute/unmute a microphone, all
microphone will be muted/unmuted simultaneously.

Configuring the Keyboard Input Method

You can use the full keyboard on the screen to enter or to edit the data. You can enter characters using the
enabled input method. On-screen keyboard on the monitor supports English and Russian input methods.
This feature is not applicable to VP59.

Procedure

1.

On your web user interface, go to 

Setting

 > 

General

 > 

General Information

 > 

Keyboard IME

.

2.

Select the desired list from the 

Disabled

 column and click 

.

Содержание MeetingEye 400























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды