If you modified some configurations which need the phone’s reboot to be
effective, you need click the Reboot, then the phone will reboot immediately.
Notice
: Before reboot, you need confirm that you have saved all
configurations.
8.4.1
Security
8.4.1.1
WEB Filter
WEB Filter
User could make some device own IP, which is pre-specified, access to the
MMI of the phone to config and manage the phone.
Field name
explanation
Web Filter Table Settings:
Add or delete the IP address segments that access to the phone.
Set initial IP address in the Start IP column, Set end IP address in the End IP
column, and click Add to add this IP segment. You can also click Delete to
delete the selected IP segment.
Web Filter setting
Select it or not to enable or disable Web Filter. Click
Apply
to make it effective.
Notice:
Do not set your visiting IP outside the Web filter range, otherwise,
you cannot logon through the web.
